878X Solenoid Valves
The 878X is a Heavy Duty two way normally closed, one directional flow, direct lift solenoid valve with threaded or flange connections.
The valve opens when energized and it does not need pressure to operate, meaning that the valve fully opens with zero pressure in the line. It is Ideal for gravity fed applications.
The piston assembly makes it possible to deliver more flow compared to diaphragm valves.
Compatible for use with a number of fluids, like fuel, diesel, gasoline, bio-fuels, ethanol, oil, gasoil, cold and hot water, air, steam, gases, and any other petroleum derivatives.
|Size||Type||Body Material||Seat Material||Max Fluid Temp F||Min Diff Pressure Psi||Max Diff Pressure Psi||Model #||hf:tax:connection_size||hf:tax:body||hf:tax:seat_material|
Important Installation Instructions
A strainer or filter (100 microns) should always be installed as close as possible to the inlet of the solenoid valve. Valve must be mounted on horizontal pipe with coil vertical and upright.
|Standard Voltage:||24, 120, 208, 240 and 480 volts AC60Hz or 110 and 220 AC50Hz|
24, 110 volts DC (3” DC not available)
Must be specified when ordering. Add voltage to the end of the Catalog Number.
For example: 2CN-16XXRVZ-878X-120/60
Table is for 3/4” to 2” valves (3” Valves draw approx. 60% more amps)
|Body||Bronze or Stainless Steel 316|
|Piston||Brass(*) or Stainless Steel 316|
|Seat||Viton, Teflon, Buna N, or EPDM|
|Seals||Viton, Teflon, Buna N, or EPDM|
|Core Tube||SS 316L|
* Aluminum in 3″ Valve